Solar panel system for home use / Mains free lighting kit offer

At Expect a Gadget we have one of the four sets of Mains free solar powered lighting kits on offer.

The Geo 2 Mains Free Solar Lighting Kit comes with a 20 Year Warranty!!

The Geo 2 - Mains Free Solar Lighting & Power Kit Ideal for lighting internal space up to 32 square metres will light sheds up to 16'x20' (5m x 6m)

Ideal for providing light and power to locations without mains power or where cost effective environmentally friendly power solutions are preferred.

Description

Unlike large solar panel systems that can take many years to pay for themselves, our Geo Mains Free Solar Lighting Kits deliver instant savings. Installing a lighting supply to remote locations isn't always possible and is often highly expensive when it is.

Our Geo kits can be installed by anyone with basic DIY skills and are exempt from Part P of the building regulations which means there is no need to pay an electrician to have your kit installed and certified.

The Geo 2 - Mains Free Solar Lighting Kit can be used with a 12ah or greater 12v battery. It is recommended however that if you are only using a low capacity battery that you either add a charge controller to the system or disconnect it when not in regular use, to prevent overcharge.

Key features

• Cell: Polycrystalline silicon cells
• Size: 285mm × 350mm × 17mm
• Encapsulation: sealed with low iron tempered glass and anodized aluminium alloy frame
• Peak output: power 10w
• Peak voltage: 18v
• Open circuit voltage: 21.6v
• Life span for each module: 25 years.
• Connection box: waterproof junction box.
• 20 Year Warranty

Geo 2 Applications

The Geo 2 will light an area of 32 square metres making it ideal for medium / large sized rooms, sheds, garages, outhouses, wendy houses, greenhouses and tree houses. As well as providing you with lighting you can use the charge stored in the battery for powering a variety of small electronic devices.

How do I set them up?

Step 1
Connect wires to the solar panel
Step 2
Position and fix panel in desired location
Step 3
Run and fix wire along chosen path from solar panel to the battery.
Step 4
Attach wire to light switch and connection block and run wire to battery.
Step 5
Connect new length of wire to light switch and into connection block. Run wire to first lamp holder.
Step 6
Back at the battery add in line fuses and connect to battery.

Turn the light on!

Detailed Instructions and Diagram will be included in pack but it really is this simple.

How does it work?

The solar panel within this kit will generate electicity from the sun, into a connected 12v battery. This battery then stores the power ready for use when required. Connected to the battery via a simple circuit are the 12v light bulbs, with a switch situated between them and the battery. Once the switch is turned on the circuit is complete and charge from the battery will power your 12v lightbulbs.

What You Get

• 1 x 10 Watt Solar Panel
• 2 x Crocodile clips
• 2 x Fuse holders
• 2 x 5a fuse
• 6 x Ring terminals
• 2 x Light bulb holder (bayonet fitting)
• 2 x 9w 12v spiral light bulb (bayonet fitting)
• 1 x Light switch
• 1 x Light switch back box
• 2 x Individual connection blocks
• 4 x Screws
• 4 x Roof fixing blocks
• 1 x 5m run of cable
• 4 x Cable ties
• 8 x Cable clips 

Our Price: £94.49
Was: £102.11
You Save: £7.62 (7%)

Click here to buy a great solar panel system for home use